Mogami 2534 NEGLEX Quad Cable

Reference Standard NEGLEX 2534 Quad High Definition Mic. Cable has become popular around the world as the standard for high quality digital and analog recording. Quad cables are perfect for home studios suffering from wiring and grounding problems, also on stage to minimize noise created by moving cables, as well as where intense RFI interference is a problem. There’s two pair of wires in a Quad cable, in a standard cable there’s one twisted pair. Noise generated by one pair tends to be out of phase with the adjacent pair, so it cancels it’s generated noise. Double conductor quad cables are effective in canceling noise that can get past even the best of shields.

Inner Conductors 20 strands 0.12 OFC
Inner Conductors 24 AWG Oxygen Free Copper
Spiral Wound Shield
Overall Cable Diameter 0.236″ – 6mm
Outer Jacket Material Flexible PVC
ELECTRICAL & MECHANICAL CHARACTERISTICS
DC Resistance Inner Conductor 0.025W/Ft
DC Resistance Shield 0.0037W/Ft
Balanced Quad Connection Cond.-Cond. 29.6pF/Ft
Balanced Quad Connection Cond.-Shield Cond.-Shield. 33.6pF/Ft
Inductance between conductors at 1kHz. 20°C 0.12μH/Ft
Electrostatic Noise 50mV Max.
Electromagnetic Noise 0.15mV Max.
Microphonics at 50KW Load 43 mV Max.
Voltage Breakdown Must withstand at DC 500V/15sec.
Insulation Resistance 100000 M W × m Min. at DC 125V, 20°C
Operating Temperature Range -4°F~ +158°F

G&H XLR Connectors

G&H Black w/Gold contacts XLR Connectors feature beryllium copper sockets in the female, and tellurium copper pins in the male connectors. What does that mean?? Approximately 3X the conductivity for a cleaner and fuller sound. The strength of the “chuck” style strain relief makes sure the connector stays put. Sounds great, and lasts!

G&H TRS Plugs

The BF3PM Series is designed to continue our tradition of highest quality signal transmission and rugged reliability. It incorporates our OFC copper core for the hot and brass for the return and ground. The Tip, Ring, and Sleeve are assembled by insert molding the insulation between and around the components. Then the copper is cupped for soldering, the ring terminal is the same height as the hot for ease of wire prep. The ground/strain relief is staked for a solid connection that won’t loosen.

OFC copper core for highest conductivity
1/2” profile for highest packing density
Gold plated plug for maximum connection reliability
Tin plated ground and ring terminals for ease of soldering
Solid brass housing protects the plug
Separately crimped ground won’t loosen
Hot solders directly to the copper core for clean signal transmission
Design eliminates the need for an insulator over the ground making soldering easier

Neutrik XX Series XLR Connectors

The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Neutrik XLR Male Connector – NC3MXX-B

3 pole male cable connector with black metal housing and gold contacts

Male connector with improved locking recess without “window”, more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Colored rings and boots available for coding or identification
Sleek and ergonomic design – valuable and handy
Rugged zinc diecast shell, longlasting and dependable
Internal thread on shell is well protected against any damage

Neutrik XLR Female Connector – NC3FXX-B

3 pole female cable connector with black metal housing and gold contacts

Unique cage design of female contact for low contact resistance and high integrity
Female contact incorporates a solder barrier to prevent solder running into the contact mating area
Female connector with improved solid metal latch which is larger and easier to handle
Additional ground spring contacts for better shell ground continuity
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Colored rings and boots available for coding or identification
Sleek and ergonomic design – valuable and handy
Rugged zinc diecast shell, longlasting and dependable
Internal thread on shell is well protected against any damage

Neutrik 1/4″ TRS Plug- NP3X-B

3 pole 1/4″ professional phone plug, gold contacts, black shell

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4″ plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Extra slim 1/4″ plug for highest packing density
Robust diecast shell in stylish design
Proven chuck type strain relief for reliable cable retention
Sleek design for best handling convenience
Precision machined one-piece contacts – avoid hook up of tip contact

Techflex is a braided sleeving that helps protect your cables. It is braided from 10 mil polyethylene terepthalate (PET) monofilament yarns, and is basically an exoskeleton that upgrades your cables to be as strong a superhero.

We offer TechFlex sleeving in the following colors:

Black

Carbon

Black Magic

Neon Blue

Customize your cable with your name, the name or logo of your band, venue, shop, or event. How about marking the cable with the source or destination? Maybe your Dog’s name? Get creative! Your name and/or logo or whatever, is printed on one side of the Blue Collar, and the Blue Collar logo on the other. Just enter the text you want, or upload your artwork or logo, when you place your order. Cables cost a lot of dough. We’ve heard sometimes cables sprout legs and run away, for sure customized cables have a better chance of finding their way home!