Black Mamba Effects Snake
$199.00
30 foot, 2 channel snake for amp to pedalboard and back. 1/4″ G&H Bigfoot Black/Gold straight plugs on one end, 1/4″ G&H Bigfoot Black/Gold right angle plugs on the other. Two individual Canare GS-6 cables, encased in a black TechFlex sleeve, with 24″ fanout on the right angle (typically the pedalboard) ends, and 12″ fanout on the straight (amp and/or wireless send/return) ends. Customization, additional channels, plug combinations, of course is no problemo, just send us an email and let’s come up with a solution. And yes, it’s personalized!
Canare GS-6 Cable
- Electronic Instruments.
- Hi-Fi Interconnects.
- Audio Patch Cords.
- PreAmp to power Amp connections
- Stays Flexible even in freezing Weather.
- Oxygen Free Copper Conductor & Shield.
- Reduced Microphonic Handling Noise.
- Low Capacitance & Resistance.
A specially designed Oxygen Free Copper 18 AWG cable for connecting Guitar/Bass or Keyboards to amps, mixers, effects pedals and all outboard signal processing gear. Low capacitance and low series resistance provides improved frequency response (flat to 50kHz). A bright, ringing characteristic sound is preserved, even when using HI-Z guitar pickups with long cable runs. The proprietary double Carbon/Braid Copper shield construction eliminates microphonic handling noise, especially on stage where amps are often set at maximum volume levels. A great cable for studio and stage, the braided shield blocks noise – period. Bass players, this cable gives you tight and lively low end, clean highs with no shrillness. Keyboardists like the clean, transparent, yet not harsh GS-6!
G&H BigFoot Gold Plugs
The first 1/2” profile right angle plug. Like the BF2P series the RF2P delivers a clean tone in a roadworthy package that spares you the embarrassment, time, and cost of having to make repairs to your audio system at an inopportune time due to plug failure. That’s lasting value.
It starts with an OFC copper core for maximum conductivity. Another advantage of the copper is that if the plug is bent the copper will stretch and not break. You can straighten it, play on and replace it later. The hot solder tab is press fit and riveted for double reliability. The ground is staked to the plug sleeve so that it can never loosen and cause crackling. Finally the terminals, insulator and housing are interlocked to prevent turning and loosening.
- OFC copper core for highest conductivity
- Gold plated plug for maximum connection reliability
- 1/2” profile file for highest packing density
- Tin plated hot and ground for ease of soldering
- Interlocked connections to prevent loosening
- Solid brass housing protects the plug
- Separately crimped ground won’t loosen
- No small screws to lose
- Plug opens up for easy soldering
G&H Right Angle Gold Plugs
The first 1/2” profile right angle plug. Like the BF2P series the RF2P delivers a clean tone in a roadworthy package that spares you the embarrassment, time, and cost of having to make repairs to your audio system at an inopportune time due to plug failure. That’s lasting value.
It starts with an OFC copper core for maximum conductivity. Another advantage of the copper is that if the plug is bent the copper will stretch and not break. You can straighten it, play on and replace it later. The hot solder tab is press fit and riveted for double reliability. The ground is staked to the plug sleeve so that it can never loosen and cause crackling. Finally the terminals, insulator and housing are interlocked to prevent turning and loosening.
- OFC copper core for highest conductivity
- Gold plated plug for maximum connection reliability
- 1/2” profile file for highest packing density
- Tin plated hot and ground for ease of soldering
- Interlocked connections to prevent loosening
- Solid brass housing protects the plug
- Separately crimped ground won’t loosen
- No small screws to lose
- Plug opens up for easy soldering
Techflex is a braided sleeving that helps protect your cables. It is braided from 10 mil polyethylene terepthalate (PET) monofilament yarns, and is basically an exoskeleton that upgrades your cables to be as strong a superhero.
We offer TechFlex sleeving in the following colors:
Black
Carbon
Black Magic
Neon Blue
Customize your cable with your name, the name or logo of your band, venue, shop, or event. How about marking the cable with the source or destination? Maybe your Dog’s name? Get creative! Your name and/or logo or whatever, is printed on one side of the Blue Collar, and the Blue Collar logo on the other. Just enter the text you want, or upload your artwork or logo, when you place your order. Cables cost a lot of dough. We’ve heard sometimes cables sprout legs and run away, for sure customized cables have a better chance of finding their way home!
Related products
-
![]()
Customize Now This product has multiple variants. The options may be chosen on the product pageLow Pro High Flow Patch Cable
$20.00 – $25.00
