QUAD Pro – Mogami
$38.00
- Mogami 2534 Neglex Quad Cable
- Neutrik or G&H XLR/TRS connectors with gold contacts
- Balanced cables for stage and studio use
- 24 AWG Conductors
- Conductor insulation is XLPE (Cross-Linked Polyethylene)
- Served (spiral) bare copper shield
- 0.236″ (6 mm) black PVC jacket
- Optional TechFlex sleeving
- Free Customization
- Lifetime Warranty
Balanced cables for stage and studio use. Our QUAD Pro – Mogami cables use G&H XLR and/or TRS connectors with gold plated contacts for better conductivity and resistance to wear, connected to Mogami 2534 Neglex Quad cable – an audiophile quality 4 conductor cable with a spiral wound shield. This is the ‘go to’ cable at many studios worldwide. The Quad cable configuration inherently cancels noise, including internal noise generated by the cable when it’s moving around. They’re available with TechFlex sleeving as well, to help protect your cable investment. As with all Blue Collar cables, we include FREE CUSTOMIZATION on your cables. When the gig’s over, there’s no question which cables are yours!
- Mogami 2534 Neglex Quad Cable
- G&H XLR/TRS Connectors
- Neutrik XLR/TRS Connectors
- TechFlex Sleeving
- Free Customization
Mogami 2534 NEGLEX Quad Cable
Reference Standard NEGLEX 2534 Quad High Definition Mic. Cable has become popular around the world as the standard for high quality digital and analog recording. Quad cables are perfect for home studios suffering from wiring and grounding problems, also on stage to minimize noise created by moving cables, as well as where intense RFI interference is a problem. There’s two pair of wires in a Quad cable, in a standard cable there’s one twisted pair. Noise generated by one pair tends to be out of phase with the adjacent pair, so it cancels it’s generated noise. Double conductor quad cables are effective in canceling noise that can get past even the best of shields.
- Inner Conductors 20 strands 0.12 OFC
- Inner Conductors 24 AWG Oxygen Free Copper
- Spiral Wound Shield
- Overall Cable Diameter 0.236″ – 6mm
- Outer Jacket Material Flexible PVC
- ELECTRICAL & MECHANICAL CHARACTERISTICS
- DC Resistance Inner Conductor 0.025W/Ft
- DC Resistance Shield 0.0037W/Ft
- Balanced Quad Connection Cond.-Cond. 29.6pF/Ft
- Balanced Quad Connection Cond.-Shield Cond.-Shield. 33.6pF/Ft
- Inductance between conductors at 1kHz. 20°C 0.12μH/Ft
- Electrostatic Noise 50mV Max.
- Electromagnetic Noise 0.15mV Max.
- Microphonics at 50KW Load 43 mV Max.
- Voltage Breakdown Must withstand at DC 500V/15sec.
- Insulation Resistance 100000 M W × m Min. at DC 125V, 20°C
- Operating Temperature Range -4°F~ +158°F
G&H XLR Connectors
G&H Black w/Gold contacts XLR Connectors feature beryllium copper sockets in the female, and tellurium copper pins in the male connectors. What does that mean?? Approximately 3X the conductivity for a cleaner and fuller sound. The strength of the “chuck” style strain relief makes sure the connector stays put. Sounds great, and lasts!
G&H TRS Plugs
The BF3PM Series is designed to continue our tradition of highest quality signal transmission and rugged reliability. It incorporates our OFC copper core for the hot and brass for the return and ground. The Tip, Ring, and Sleeve are assembled by insert molding the insulation between and around the components. Then the copper is cupped for soldering, the ring terminal is the same height as the hot for ease of wire prep. The ground/strain relief is staked for a solid connection that won’t loosen.
- OFC copper core for highest conductivity
- 1/2” profile for highest packing density
- Gold plated plug for maximum connection reliability
- Tin plated ground and ring terminals for ease of soldering
- Solid brass housing protects the plug
- Separately crimped ground won’t loosen
- Hot solders directly to the copper core for clean signal transmission
- Design eliminates the need for an insulator over the ground making soldering easier
Neutrik XX Series XLR Connectors
The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.
Neutrik XLR Male Connector – NC3MXX-B
3 pole male cable connector with black metal housing and gold contacts
- Male connector with improved locking recess without “window”, more stringent housing increases durability
- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design – valuable and handy
- Rugged zinc diecast shell, longlasting and dependable
- Internal thread on shell is well protected against any damage
Neutrik XLR Female Connector – NC3FXX-B
3 pole female cable connector with black metal housing and gold contacts
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Colored rings and boots available for coding or identification
- Sleek and ergonomic design – valuable and handy
- Rugged zinc diecast shell, longlasting and dependable
- Internal thread on shell is well protected against any damage
Neutrik 1/4″ TRS Plug- NP3X-B
3 pole 1/4″ professional phone plug, gold contacts, black shell
The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4″ plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).
The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.
The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.
- Extra slim 1/4″ plug for highest packing density
- Robust diecast shell in stylish design
- Proven chuck type strain relief for reliable cable retention
- Sleek design for best handling convenience
- Precision machined one-piece contacts – avoid hook up of tip contact
Techflex is a braided sleeving that helps protect your cables. It is braided from 10 mil polyethylene terepthalate (PET) monofilament yarns, and is basically an exoskeleton that upgrades your cables to be as strong a superhero.
We offer TechFlex sleeving in the following colors:
Black
Carbon
Black Magic
Neon Blue
Customize your cable with your name, the name or logo of your band, venue, shop, or event. How about marking the cable with the source or destination? Maybe your Dog’s name? Get creative! Your name and/or logo or whatever, is printed on one side of the Blue Collar, and the Blue Collar logo on the other. Just enter the text you want, or upload your artwork or logo, when you place your order. Cables cost a lot of dough. We’ve heard sometimes cables sprout legs and run away, for sure customized cables have a better chance of finding their way home!
